Introduction
The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight® technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems.
Two ways to get PLX2 performance
The "02" models (PLX1802, PLX2502, PLX3102 and PLX3602) are the right choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. These models feature built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.
The compact "04" models (PLX1104, PLX1804) bring the same performance and technology, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), these models offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg) these "plug-and-play" amplifiers are perfect for ultra-portable rigs, as well as reference-quality playback.
Mechanical
PLX2 series amplifiers have the refined, rugged good looks usually associated with high performance racing cars, competition bikes, professional power tools, and high power machinery. A solid, cast-aluminum front panel adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability.
Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping the installers fingers on the rack sides. The exterior appearance of PLX2 amplifiers conveys what's inside - simply and truly, 13 to 21 pounds of the most advanced professional power amp on the planet.
PowerLight Technology
PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs. / 9 kg) with a highly efficient and lighter-weight active design. Conventional AC transformers provide 100 or 120 energy pulses per second, the PowerLight supply delivers 190,000 to 230,000 pulses per second. More pulses make it easier to provide on-demand power for the amplifier's output section. The power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean.
Audio Quality
PLX2 audio power circuitry achieves performance normally associated with studio reference amplifiers. In order to reduce crossover distortion, precision bias tracking makes minute adjustments as amplifier temperature changes. The benefit is cleaner high-frequency and more consistent sound no matter how hard the amplifier is driven. The higher power models use QSC-exclusive class H output circuitry, a form of audio "turbocharging" that increases maximum power without affecting the basic audio quality.
| SPECIFICATIONS | PLX1802 |
| |
STEREO MODE, both channels driven * |
8 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
320 W
330 W |
4 ohms
FTC 20 Hz - 20 kHz 0.05% THD
EIA 1 kHz 0.1% THD |
525 W
575 W |
2 ohms EIA 1 kHz 1% THD
|
900 W |
| |
BRIDGE MONO MODE * |
8 ohms
20 Hz-20 kHz 0.1% THD
EIA 1 kHz 0.1% THD |
1100 W
1200 W |
| 4 ohms 1 kHz 1% THD |
1800 W |
| |
|
| Signal to Noise (20 Hz - 20 kHz) |
-107 dB |
| Input Sensitivity @ 8 ohms |
1.28 Vrms |
| Gain @ 8 ohms |
32 dB |
| Output Circuitry |
AB |
| Distortion (SMPTE-IM) |
Less than 0.02% |
Typical Distortion
1/8 rated power, 20 Hz-20 kHz
Full rated power, 20 Hz-20 kHz |
Less than 0.02%
Less than 0.02% |
| Frequency Response |
20 Hz-20 kHz, -0.5 dB |
| Damping Factor |
Greater than 500 |
| Input Impedance |
20k ohms balanced
10k ohms unbalanced |
| Input Clipping |
11 Vrms (+21 dBu) |
| Cooling |
Variable-speed fan, rear-to-front air flow |
| Input Connectors, each channel |
3-pin XLR and 1/4" TRS balanced |
| Output Connectors, each channel |
Neutrik® NL4 Speakon® and Touch-proof binding posts
(Both channels available on Ch 1 NL4 connector) |
| Rear Panel Switches |
Input Configuration: Bridge/Stereo/Parallel
Clip Limiters each channel
Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic) |
| Front Panel Controls |
Detented Input Attenuator: 0 to ∞ dB
Power On/Off |
| Front Panel Indicators |
Clip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED
Parallel: Amber LED
Bridge Mono: Amber LED |
| PROTECTION |
| Amplifier Protection |
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
| Load Protection |
On/off muting, DC-fault power supply shutdown |
| Infrasonic |
-3 dB, 5 Hz |
| DC fault |
Power supply shutdown |
| Ultrasonic |
-3 dB, 85 kHz |
| Short Circuit |
Cutback |
| Thermal |
Muting at 90° C |
| Over Current |
Active clip limiting
Power supply cutback |
| High Line |
Standard +15%, survive +25% |
| Low Line |
-33% |
| PHYSICAL |
Dimensions
Height
Width
Depth, Rack mounting surface to rear panel
Overall Depth |
3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
12.8" (32.6 cm)
14.875" (37.9 cm) |
| Weight |
21 lbs. (9.5 kg) net
26 lbs. (11.8 kg) shipping |
| Agency Approvals |
CE, FCC, cUL, UL |
* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits
| CURRENT CONSUMPTION | PLX1802 |
| 1/8 Power (pink noise) |
8 ohms
4 ohms
2 ohms |
5A/120V
8.7A / 120V
13A / 120V |
| 1/3 Power (pink noise) |
8 ohms
4 ohms
2 ohms |
7.7A/120V
12.3A / 120V
19.7A / 120V |
| Full Power |
8 ohms
4 ohms
2 ohms |
12.6A/120V
21.3A / 120V
33.2A / 120V |
| Notes |
Long term, active-limited to 25A/120V |
QSC is upgrading the standard 3 year warranty to 6 years (a $99 value) for all customers who complete their online registration.
This offer applies to GX, RMX, PLX, PLX2, and PL2 series amplifiers. That's all there is too it. QSC is rewarding those who properly register their products and helping them improve their product lines by answering a few survey questions in the process.
Click here to register for the 6-year Extended Warranty
